USA Authorized Jelly Force RetailerAuthorized seller1 gummy a day · 30 per bottle60-day money-back guaranteeLot JEL-26/GO-2643

Batch check

Jelly Force Batch Check: What to Verify Before You Open

Quick answer

Check the box, the bottle and the cap before the first gummy. The seal under the cap must be whole, because the label says not to use the product if it is broken or missing. Match the lot, JEL-26/GO-2643, and the CoA reference, JEL-2643-26-GO. Both are reference labels, not lab proof.

What do you check on a Jelly Force delivery?

Three things, in order: the outer box, the bottle, then the seal under the cap. Each step takes seconds and each one is easier to settle on day one than on day forty.

Do it before you open anything. Once the seal is broken, a damaged bottle and a used bottle look alike.

  1. Photograph the sealed box

    Get the shipping label and any packing slip in the same frame. Note the delivery date.

  2. Count the bottles

    Match the count to the pack you ordered: 1, 2, 3 or 6 tubs, each with 30 gummies.

  3. Read the label wrap

    Compare the printed lines with the table below. Look at the panel, not only the front.

  4. Unscrew the cap and stop

    Look at the seal across the mouth of the tub before you touch it.

  5. Write down the lot

    Copy the lot line into your order email so bottle and order stay linked.

Which lines must the Jelly Force label carry?

Ten of them, and every one is printed on the wrap. The right column says how to read each line, because several of them sound stronger than they are.

The printed Jelly Force label, line by line
Label lineWhat it should sayHow to read it
Front nameJellyforce, Male Enhancement GummiesThe site name is Jelly Force; the wrap prints it as one word
Support lineMay support: Vitality, Drive, Performance, each starredStars point to the FDA disclaimer, not to a proven effect
Blend line82 mg per serving, marked with a double starThe double star leads to the 567 mg dry powder line
Count30 gummiesOne a day makes a 30-day bottle
Suggested useTake 1 gummy once daily as a dietary supplement, or as directed by a qualified health care professional.One gummy, once a day, and no more without a clinician
WarningPregnancy, nursing, medicines, medical conditions, children, broken sealRead all of it before the first gummy
StorageStore at room temperature, 59-86 degrees F (15-30 degrees C). Keep the bottle tightly closed.A hot car or a steamy bathroom shelf is outside that range
OriginMade in the USA with globally sourced ingredients (as printed on the label)Made in the USA does not mean every plant was grown here
FacilityProduced in a GMP facilityA statement by the maker, with no auditor named
DistributorInfo Wealth CO, Pinellas Park, FL 33781, 888-338-0317 (as printed on the label)A distributor address is not a factory address

Why does the seal under the cap decide everything?

Because it is the one tamper check the label itself gives you. Everything else on the bottle can be printed. The seal is physical.

Look for four things. The foil should lie flat, cover the whole mouth, stick down all the way round, and tear cleanly when you finally lift it.

A seal that peels away with no resistance, or one that is already wrinkled at the edge, has been off before.

What do lot JEL-26/GO-2643 and CoA JEL-2643-26-GO really tell you?

They tell you which production run your bottle belongs to. That is useful and it is all they do.

A lot number lets the maker trace a batch. A CoA reference is a filing name for a certificate of analysis. The certificate itself has not been published, and no testing laboratory is named.

Pros

  • A lot number exists and can be quoted on a call
  • A CoA reference exists for this run
  • The pair links your bottle to a batch record if anything goes wrong

Cons

  • No certificate has been shared with buyers
  • No laboratory is named
  • No public lookup tool is published
  • Neither number reports what is inside the gummy

Which Jelly Force number should you call?

The order desk, unless your question is about the bottle itself rather than your order. Two phone numbers exist and they belong to different parties.

The label prints the distributor's line. The sales page prints the order desk. Mixing them up costs days.

Two numbers, two different parties
LineNumberWho answersUse it for
Order desk+1 (302) 200-3480The team behind the sales pageOrders, tracking, changes, refunds
Label distributor888-338-0317Info Wealth CO, Pinellas Park, FLQuestions about the printed bottle
Website inbox[email protected]This site, Mon-Fri 9:00am-5:00pm ETPage errors and corrections only

A Jelly Force check failed: what now?

Work in the same order every time. Stop, record, then call. The one thing not to do is take a gummy to see whether it seems fine.

  1. Stop using the bottle

    Cap it and set it aside. Do not decant, wash or bin anything.

  2. Photograph the fault

    Seal, cap, label wrap, lot line and the outer box, in daylight if you can.

  3. Gather your details

    Order ID, delivery date, pack size and lot. Refunds need full name, email, and order ID.

  4. Call the order desk

    call +1 (302) 200-3480 with your order ID. Say clearly that this is a bottle condition problem, not a change of mind.

  5. Keep everything

    Return shipping is yours: buyer pays return shipping; use tracking. Bottles go to 1700 Broadway, Floor 28, New York, NY 10019, USA.

Refund timing, once the returned bottles are credited, is 3-5 business days after the returned bottles are credited, then 5-10 days to show on your card. The refund policy page sets out the rest.

How should a bottle that passed be stored?

Exactly as the label says. Store at room temperature, 59-86 degrees F (15-30 degrees C). Keep the bottle tightly closed. Gummies are more sensitive to heat than capsules, because sugar and pectin soften.

Away from heat

A kitchen cupboard beats a car, a windowsill or a bathroom shelf.

Out of reach of children

The label says so, and a sweet gummy in a tub is exactly what a child will open.

Label facing out

Keep the wrap readable so the lot and the warning stay findable.

Keep the bottle tightly closed between gummies. Moisture is what turns a firm gummy into a sticky clump.

What can a Jelly Force batch check not settle?

A great deal. Checking a bottle tells you the package is intact. It says nothing about what is inside the gummy.

  • How much of each of the nine blend ingredients you are getting
  • Whether the finished formula has been tested by anyone outside the company
  • Whether the GMP claim was audited, and by whom
  • Whether the free-from seals are backed by an allergen statement, since none is published
  • Whether the product suits your medicines, which is a question for your doctor

Buying through the authorized route matters for the same reason. FDA keeps finding hidden prescription drugs in men's products sold through unofficial channels (FDA, 2026).

See the testing and quality page for what the ten seals do and do not cover.

Jelly Force batch check: quick answers

What should I do first when the box arrives?

Photograph the unopened box next to the packing slip, then open it. A photo taken before you handle anything settles arguments later about damage, count and what was inside.

Where is the seal, and what does a good one look like?

Under the screw cap, across the mouth of the tub. It should be flat, fully stuck down and unbroken. A lifted edge, a wrinkle or a torn tab all count as broken.

The seal is broken. Can I still take one gummy?

No. The label says not to use the product if the seal under the cap is broken or missing. Stop there, photograph it and call +1 (302) 200-3480 with your order ID.

Does lot JEL-26/GO-2643 prove the gummies were tested?

It does not. Lot and CoA numbers are reference labels for matching an order. They are not lab proof. A lot number links your bottle to a production run. It carries no test result on its own.

Can I look up the CoA reference myself?

No public lookup is published for JEL-2643-26-GO, and no certificate has been shared. Quote the reference when you call, and ask for the document if you want it.

Which number do I call, the one on the label or the order desk?

The order desk, +1 (302) 200-3480. The label's own line, 888-338-0317, belongs to the distributor and has no view of an order placed through this website.

What if the label looks different from the photos here?

Do not open it. Wording, panel and layout should match. Photograph the differences and call +1 (302) 200-3480 the same day, while the return window is easy.

Should I keep the bottle after it is empty?

Keep it until the 60 days have passed. A refund sends bottles back to 1700 Broadway, Floor 28, New York, NY 10019, USA, so an empty tub with its label still matters.

References

  1. U.S. Food and Drug Administration (2026). Tainted Sexual Enhancement Products.
Three bottles of Jelly Force

Ready when you are

Order Jelly Force from the authorized outlet

Packs of 1, 2, 3 or 6 bottles, 30 gummies each, priced on the secure order page. Every order has a 60-day money-back guarantee. Questions first? Call +1 (302) 200-3480.

Accepted cards: Visa, Mastercard, American Express, Discover